Pentax K-7 K-7 Manual - Page 307

Error Messages 305 Error Message Description Memory card full The SD Memory Card is full and no more images can be saved. Insert a new SD Memory Card or delete unwanted images. (p.49, p.79) Data may be saved when you perform the following operations. • Change the file format to [JPEG]. (p.188) • Change the JPEG Recorded Pixels or JPEG Quality setting. (p.186, p.187) No image There are no images for playback on the SD Memory Card. This image cannot be displayed You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or on your computer. No card in the camera The SD Memory Card is not inserted in the camera. (p.49) Memory card error The SD Memory Card has a problem, and image capture and playback are impossible. It may be viewable on a PC but not with this camera. Card is not formatted The SD Memory Card you have inserted is unformatted or has been formatted on other device and is not compatible with this camera. Use the card after formatting it with this camera. (p.256) Card is locked The write-protect switch on the SD Memory Card you have inserted is locked. Unlock the SD Memory Card. (p.50) The card is electronically locked This image cannot be enlarged Data are protected by the SD Memory Card security feature. You are trying to enlarge an image that cannot be 10 enlarged. Appendix This image is protected You are trying to delete an image that is protected. Remove protection from the image. (p.231) Battery depleted The battery is exhausted. Install a charged battery in the camera. (p.43) Not enough battery power remaining to clean sensor Appears during sensor cleaning if the battery level is insufficient. Replace the battery with a fully charged one or use an AC adaptor kit K-AC50 (optional). (p.47)