Pentax K-7 K-7 Manual - Page 185
X-sync Socket, Remove the Sync socket 2P cap
![]() |
UPC - 027075155145
View all Pentax K-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
183 X-sync Socket You can connect an external flash to the camera with a sync cord by using the X-sync socket. Remove the Sync socket 2P cap and connect a sync cord to the X-sync socket. • The use of high-voltage or high-current external flashes may cause a camera breakdown. • Flashes with reversed polarity (the center of the sync plug is minus) cannot be used due to the risk of damaging the camera or flash. • When a sync cord is connected to the X-sync socket, linked functions will not work. • To prevent vignetting caused from Trailing Curtain Sync, it is recommended 5 to take a test shot using a shutter speed one level slower than the flash sync speed. • The contact of the X-sync socket is not dust-proof and water-resistant. Attach the provided Sync socket 2P cap when not in use. Using the Flash
![](/manual_guide/products/pentax-k7-k7-manual-4fbd91e/185.png)