Pentax K-7 K-7 Manual - Page 166

164 2 Position the subject on the monitor and press the = button. The autofocus system operates. When the focus mode is set to \, turn the focusing ring until the subject is clearly visible on the focusing screen. 3 4 4 Press the shutter release button fully. Recording of the movie starts. Press the shutter release button again. Recording stops. Shooting Functions • When [Sound] is set to O (On), the camera operation sounds are also recorded. When recording a movie, mount the camera onto a tripod and do not operate the camera while recording. • While recording a movie, the autofocus system does not operate. • The flash is not available. • If you want to view a movie on an external monitor while recording it, connect the camera to an AV device with an HDMI terminal (p.235). You cannot output a movie using the PC/AV terminal while recording. • You can record movies continuously up to 4 GB or 25 minutes. When the SD Memory Card is full, recording stops and the movie is saved. • If you intend to shoot continuously for a long period, use of the AC adapter kit K-AC50 (optional) is recommended. (p.47) • You can also use the optional remote control to control recording operations. (p.138) • When recording movies, only the White Balance and Custom Image (other than Fine Sharpness) settings can be used. • The sensitivity is fixed to [AUTO]. • If a high temperature is reached inside the camera during movie recording, the recording may be terminated for the sake of circuit protection.