Pentax K-7 K-7 Manual - Page 179
Changing the Built-in Flash Discharge Method, Press the four-way controller, Select, and press
![]() |
UPC - 027075155145
View all Pentax K-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
177 Using the Built-in Flash Wirelessly Set the camera to wireless flash mode when using an external flash in combination with the built-in flash. 1 Press the four-way controller (3). The [Flash Mode] screen appears. 2 Select r and press the 4 button. The camera is ready to take a picture. Flash Mode Wireless Mode 0.0 MENU Cancel OK OK 5 • r cannot be set when the exposure mode is set to B (Green). • When the drive mode is set to i (Remote Control (3s delay)), d (Mirror lock-up) or e (Mirror lock-up remote control), or the lens aperture is not set to the s position, r cannot be selected. Using the Flash Changing the Built-in Flash Discharge Method You can change the built-in flash discharge method in wireless mode. Set in [31. Flash in Wireless Mode] in the [A Custom Setting 5] menu (p.87). 1 On Discharges the built-in flash as a master. (Default setting) 2 Off Discharges the built-in flash as a control flash. HSb (High-speed flash sync) is not available with the built-in flash.
![](/manual_guide/products/pentax-k7-k7-manual-4fbd91e/179.png)