Pentax K-7 K-7 Manual - Page 136
Aim the camera at the subject and press the shutter, release button halfway.
![]() |
UPC - 027075155145
View all Pentax K-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
134 4 Aim the camera at the subject and press the shutter release button halfway. The following indicators appear on the status screen. q: Shake Reduction On + Horizon Correction On r: Shake Reduction Off + Horizon Correction On • Set [Shake Reduction] to l (Off) when using the camera with a tripod or when this function is not needed. • [Shake Reduction] is automatically set to l (Off) and cannot be selected in the following situations. - Self-timer shooting - Remote control shooting - Bulb shooting 4 - HDR Capture - Mirror lock-up shooting - Wireless mode with an external flash Shooting Functions • The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the Shake Reduction function to become stable before gently pressing the shutter release button to take a picture. When you press the shutter release button halfway and if k appears in the viewfinder, the camera is ready to take a picture. • The Shake Reduction function is available with any Q compatible PENTAX lens. However, when the aperture ring is set to other than the s (Auto) position or a lens without an s position is used, the camera does not operate unless [37. Using Aperture Ring] in the [A Custom Setting 6] menu is set to [Permitted]. Set this beforehand. However, in such cases some functions are restricted. Refer to "Notes on [37. Using Aperture Ring]" (p.294) for details.
![](/manual_guide/products/pentax-k7-k7-manual-4fbd91e/136.png)