Pentax K-7 K-7 Manual - Page 113

111 • Set the aperture value in increments of 1/3 EV or 1/2 EV. Set the exposure steps in [1. EV Steps] in the [A Custom Setting 1] menu. (p.116) • The Shake Reduction function is automatically disabled when the exposure mode is set to p mode. • Use a sturdy tripod and the cable switch CS-205 (optional) or Remote Control F (optional) to prevent camera shake when using p mode. Connect the cable switch to the cable release terminal (p.17). • To operate the shutter release button of the remote control, set in [17. Remote Control in Bulb] in the [A Custom Setting 3] menu (p.86). • When the sensitivity is set to [AUTO] and the exposure mode is set to p mode, the sensitivity is the lowest sensitivity set in "Setting the Range of Automatic Sensitivity Correction" (p.90). • When the exposure mode is set to p, the upper sensitivity limit is ISO 1600. • There is no limit on exposure time for Bulb shooting. However, we recommend using the AC adapter kit K-AC50 (optional) when shooting with a long exposure setting as the battery is used while the shutter remains open. (p.47) 4 Shooting Functions e-dial in p & M modes You can set the functions of the front and rear e-dials in p and M modes. Set in [27. e-dial in B & X modes] in the [A Custom Setting 4] menu (p.86). Settings Front e-dial (R) 1 - (Not Available) 2 c (Aperture) 3 Sensitivity 4 c (Aperture) Rear e-dial (S) c (Aperture) - (Not Available) c (Aperture) Sensitivity