Pioneer DEH-P9800BT Owner's Manual - Page 19
Listening to the radio, Tuner
UPC - 012562793962
View all Pioneer DEH-P9800BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Tuner Section 04 English Listening to the radio 12 34 5 6 These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Stereo (5) indicator Shows when the selected frequency is being broadcast in stereo. 2 LOC indicator Shows when local seek tuning is on. 3 Band indicator Shows which band the radio is tuned to, AM or FM. 4 Preset number indicator Shows which preset has been selected. 5 Frequency indicator Shows the frequency to which the tuner is tuned. 6 Signal level indicator Shows the radio wave strength. 1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed. 2 Press BAND to select a band. Press BAND until the desired band (FM-1, FM-2, FM-3 for FM or AM) is displayed. 3 To perform manual tuning, push MULTI-CONTROL left or right. The frequencies move up or down step by step. 4 To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by pushing MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL. En 19