Pioneer DEH-P9800BT Owner's Manual - Page 87
Using compression and BMX, Adjusting loudness, Adjusting source levels, Audio Adjustments
UPC - 012562793962
View all Pioneer DEH-P9800BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Audio Adjustments Section 15 English 2 Press MULTI-CONTROL to turn BBE on. # To turn BBE off, press MULTI-CONTROL again. 3 Push MULTI-CONTROL up or down to adjust the level of BBE. Each time MULTI-CONTROL is pushed up or down, the level of BBE increases or decreases. +4 to -4 is displayed as the level is increased or decreased. Note Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc. Using compression and BMX Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. Each of the functions has a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to. ! When tuner, television or AUX is selected as a source, you cannot select COMP/BMX. 1 Use MULTI-CONTROL to select COMP/BMX. COMP/BMX appears in the display. 2 Press MULTI-CONTROL to turn COMP/ BMX on. # To turn COMP/BMX off, press MULTI-CONTROL again. 3 Push MULTI-CONTROL left or right to select the desired setting. Each time MULTI-CONTROL is pushed left or right, settings are selected in the following order: COMP 1-COMP 2-BMX 1-BMX 2 Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Use MULTI-CONTROL to select Loudness. Loudness appears in the display. 2 Press MULTI-CONTROL to turn loudness on. ON appears in the display. # To turn loudness off, press MULTI-CONTROL again. Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Use MULTI-CONTROL to select SLA. SLA appears in the display. # When selecting the FM tuner as the source, you cannot switch to SLA. En 87