Pioneer DEH-P9800BT Owner's Manual - Page 68

Section 11 XM tuner Introduction of advanced XM tuner operation 1 1 Function display Shows the function status. 1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL to select FUNCTION. Channel mode appears on the display. # To return to the channel display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display. Storing and recalling broadcast stations You can easily store up to six broadcast stations for later recall. 1 When you find a station that you want to store in memory press LIST to switch to the preset channel list mode. 2 Use MULTI-CONTROL to store the selected station in memory. Turn to change the preset number; press and hold to store. The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically. Notes ! Up to 18 stations, six for each of three XM bands can be stored in memory. ! You can also store stations assigned to preset tuning numbers by pressing and holding one of the preset tuning buttons 1-6 on the remote control. Switching the XM display % Press DISPLAY to switch the XM display. Each press of DISPLAY changes the XM display in the following order: Text information (channel name)-Artist name and text information-Song title and text information-Category name and text information -Simple display Switching the XM channel select mode You have two methods for selecting a channel: by number and by categoy. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category. 1 Use MULTI-CONTROL to select FUNCTION. Channel mode appears on the display. 68 En