Pioneer DEH-P9800BT Owner's Manual - Page 92

Section 16 Initial Settings 1 Use MULTI-CONTROL to select Mute. Mute appears in the display. 2 Press MULTI-CONTROL to select the desired setting. Press MULTI-CONTROL repeatedly to switch between the following settings: ! TEL mute - Muting ! 10dB ATT - Attenuation ! 20dB ATT - Attenuation (20dB ATT has a stronger effect than 10dB ATT) reverse, and then continue reversing every 10 seconds. 1 Use MULTI-CONTROL to select Reverse mode. Reverse mode appears in the display. 2 Press MULTI-CONTROL to turn the reverse mode on. ON appears in the display. # To turn the reverse mode off, press MULTI-CONTROL again. Switching the feature demo The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. 1 Use MULTI-CONTROL to select Demonstration. Demonstration appears in the display. 2 Press MULTI-CONTROL to turn the feature demo on. ON appears in the display. # To turn the feature demo off, press MULTI-CONTROL again. Notes ! Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. ! You can also turn on or off feature demo by pressing DISPLAY while this unit is turned off. For more details, see Feature demo mode on page 13. Note You can also turn on or off reverse mode by pressing BAND while this unit is turned off. For more details, see Reverse mode on page 13. Switching the Ever Scroll When Ever Scroll is set to ON, text information recorded on CD or iPod scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once. 1 Use MULTI-CONTROL to select Ever-scroll. Ever-scroll appears in the display. 2 Press MULTI-CONTROL to turn the Ever Scroll on. ON appears in the display. # To turn the Ever Scroll off, press MULTI-CONTROL again. Switching the reverse mode If you do not perform an operation within about 30 seconds, screen indications start to 92 En