Pioneer DEH-P9800BT Owner's Manual - Page 69

XM tuner Section 11 English 2 Press MULTI-CONTROL to select the desired channel select setting. Press MULTI-CONTROL repeatedly to switch between the following channel select settings: Channel number (channel number select setting)-Category (channel category select setting) # You can also select the XM channel select setting by pressing and holding CLOCK. Selecting a channel in the channel category 1 Select the channel select settings to Category. Refer to Switching the XM channel select mode on the previous page. 2 Push MULTI-CONTROL up or down to select the desired channel category. 3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category. Displaying the Radio ID Channel number select setting If you select CH : 000, the ID code is displayed. % Push MULTI-CONTROL left or right to select CH : 000. Channel category select setting RADIO ID is provided as a channel category for displaying the ID code. % Push MULTI-CONTROL up or down to select RADIO ID from channel category. # If you select another channel, display of the ID code is canceled. # Display of the ID code repeats displaying RADIO ID and the ID code one after the other. Selecting stations from the preset channel list The preset channel list lets you see the list of preset stations and select one of them to receive. 1 Press LIST to switch to the preset channel list mode during the channel display. 2 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically. Notes ! You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display. ! You can also recall stations assigned to preset tuning numbers by pressing one of the preset tuning buttons 1-6 on the remote control. En 69