Pioneer DEH-P9800BT Owner's Manual - Page 21
Selecting stations from the, preset channel list, Tuning in strong signals, Tuner - receiver
UPC - 012562793962
View all Pioneer DEH-P9800BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Tuner Section 04 English 2 Press MULTI-CONTROL to turn BSM on. Searching is displayed. While Searching is displayed, the six strongest broadcast frequencies will be stored under preset tuning numbers 1-6 in the order of their signal strength. When finished, the preset channel list appears. # To cancel the storage process, press MULTI-CONTROL. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. Note Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1-6. Selecting stations from the preset channel list The preset channel list lets you see the list of preset stations and select one of them to receive. 1 Press LIST to switch to the preset channel list mode during the frequency display. 2 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically. Notes ! You can also recall radio station frequencies assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the frequency display. ! You can also recall radio station frequencies assigned to preset tuning numbers by pressing one of the preset tuning buttons 1-6 on the remote control. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Use MULTI-CONTROL to select Local in the function menu. Local appears in the display. 2 Press MULTI-CONTROL to turn local seek tuning on. Local seek sensitivity (e.g., Level 2) appears in the display. # To turn local seek tuning off, press MULTI-CONTROL again. 3 Push MULTI-CONTROL left or right to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: Level 1-Level 2-Level 3-Level 4 AM: Level 1-Level 2 The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. En 21