Pioneer PDP-434CMX Operating Instructions - Page 10
About operations in this manual - plasma display
View all Pioneer PDP-434CMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English Before Proceeding About operations in this manual Each operation is described in its proper operating order. These Operating Instructions will refer to the operating controls found on the remote control unit, with the exception of those buttons found only on the main plasma display itself. When the plasma display controls include equivalent buttons to those found on the remote control unit, the commands can be performed on the main unit as well. The following illustrations are an example of the actual operations used for the section "PICTURE adjustment". The examples are provided to allow you to confirm whether the operation is performed correctly or not. Note The screen images depicted in these Operating Instructions should be considered typical images; some difference will be seen in practice, depending on the screen item displayed and its contents, the input source and various other control settings. English PICTURE/SCREEN Adjustment PICTURE adjustment MENU 5/∞ 2/3 SET MENU 2/3 SET 5/∞ Main unit operating panel Remote control unit 1 Press the MENU button to display the menu screen. MENU PICTURE SCREEN CONTRAST : BRIGHTNESS : R.LEVEL : G.LEVEL : B.LEVEL : H.ENHANCE : V. E N H A N C E : SETUP 0 0 0 0 0 0 0 PICTURE RESET INPUT1 OPTION SET ENTER MENU EXIT 2 Use the 5/∞ buttons to select the adjustment item, then press the SET button. MENU PICTURE SCREEN CONTRAST : BRIGHTNESS : R.LEVEL : G.LEVEL : B.LEVEL : H.ENHANCE : V. E N H A N C E : SETUP 0 0 0 0 0 0 0 PICTURE RESET INPUT1 OPTION 4 Press the SET button. Pressing the SET button writes the value into the memory and returns the display to the step 2 screen. 5 When the setup is finished, press the MENU button to exit the menu screen. Note Make these adjustments for each input (INPUT1 or INPUT2) and signals. [PICTURE] mode adjustment items Below are brief descriptions of the options that can be set in the [PICTURE] mode. CONTRAST Adjust according to the surrounding brightness so that the picture can be seen clearly. BRIGHTNESS Adjust so that the dark parts of the picture can be seen clearly. R. LEVEL Adjust the amount of red in the picture. G. LEVEL Adjust the amount of green in the picture. B. LEVEL Adjust the amount of blue in the picture. H. ENHANCE Sharpens the image in the horizontal direction. V. ENHANCE Sharpens the image in the vertical direction. To reset [PICTURE] mode settings to the default If settings have been adjusted excessively or the picture on the screen no longer appears natural, it may prove more beneficial to reset the [PICTURE] mode to default settings instead of trying to make adjustments under already adjusted conditions. 1 In step 2 in the previous procedure, use the 5/∞ buttons to select [PICTURE RESET], then press the SET button. SET ENTER MENU EXIT 3 Use the 2/3 buttons to adjust the picture quality as desired. BRIGHTNESS SET :0 EXIT PICTURE RESET YES NO SET SET MENU EXIT 2 Use the 2/3 buttons to select [YES], and press the SET button. All [PICTURE] mode settings are returned to the factory set default. 25 En PICTURE/SCREEN Adjustment Before Proceeding 4 En