Pioneer VSX-47TX Owner's Manual - Page 108
Surround EX or DTS ES
View all Pioneer VSX-47TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Techno Tidbits & Problem-solving Symptom Video No image is output when a function is selected. There is no image coming from the selected component video jacks. Can't record video. Input/display The display is dark. You can't get DIGITAL to come up when using the SIGNAL SELECT button. The digital format indicator doesn't light up even when playing a non-PCM digital source. A compressed digital source is being played, but the digital format indicators don't light up. During playback of a compressed digital source, the 2 PRO LOGIC or NEO:6 indicators show in the display. During playback of a Surround EX or DTS ES source on the AUTO setting, the EX and ES indicators won't light. During playback of a Surround EX or DTS ES source on the AUTO setting, the EX and ES indicators light, but the signal is not properly processed. Cause Remedy • Improper connections. • The input source is not properly selected. • The video input selected on the TV monitor is incorrect. • The TV or monitor is hooked up with cord that is different than that used for the video player. • The component video setting is incorrect. • Make sure the component is connected correctly (see p.16, 17-19). • Press the correct function button. • Please read the TV monitor manual and change the settings accordingly. • Use the same cable to connect to your TV and all your video equipment (see p.1623). • Select the correct C'NENT VIDEO IN setting (see p.89). • The type of cord connected to the TV doesn't match your video input settings. • Change the settings to match the cord connected (see p.16-23). • The source is copy protected. • You are trying to record a source connected to the component video jacks. • The recorder's video input is hooked up using a different type of cord to the source video output. • You can't record sources that have been copy protected. • Connect the component with S video or composite video cords (see p.16-23). • Hook up the source and the recorder using the same type of video cord. • The display DIMMER button is pushed. • Either the digital connections or the DIGITAL IN SELECT is incorrect. • Tape 2 MONITOR is on. • MULTI CH IN mode is on. • The player is paused or stopped. • There is a mistake in the player settings for audio output. • Press DIMMER on the remote control repeatedly to return to the default setting (see p.56). • Make sure the digital connections (see p.17-19 & 22-23) and the DIGITAL IN SELECT (see p.88) is done correctly. • Press the Tape 2 MONITOR button so it goes into the off setting (see p.54) . • Turn MULTI CH IN mode off (see p.53) . • Play the source. • Fix the audio settings (check the manual that came with your DVD player). • Although it's a non-PCM digital source there is a possibility the present track is not the proper format (5.1, 6.1, or 7.1 channel). • There is no problem. The indicator won't light when the track is not a compressed digital source. • The digital signal is not being sent with the source. • The audio is in two channel format. • It has already been Dolby surround encoded. • The source may be 6.1 playback compatible, but there is no signal from the source to indicate this. • Choose DIGITAL or AUTO with the signal select button (see p.45). • This is not a malfunction. Check the manufacturer information for the source. • Switch the LISTENING CH SELECT to 7.1 and switch to the THX Surround EX or Standard TX listening mode see p.43 & 44). • The listening mode is set incorrectly for the source. • Switch the LISTENING CH SELECT to AUTO and select HOME THX or STANDARD listening modes (see p.43 & 44). • Switch the LISTENING CH SELECT to 7.1 and switch to the THX Surround EX or Standard TX listening mode (see p.43 & 44). 108