Pioneer VSX-47TX Owner's Manual - Page 34
Display
View all Pioneer VSX-47TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Displays & Controls Display All the display information is explained and/or referenced here. 1 23 4 SIGNAL L C R AUTO RF LS S RS LFE OVER ATT DIGITAL SP 3 AB ANALOG TAPE 2 TUNED STEREO MONO RDS E ON RF ATT 5 DIGITAL DISC MTRX PRO LOGIC Neo :6 MPEG 2ch PLAYBACK 8 76 1 SIGNAL SELECT indicators Light to indicate the input signal you selected. ANALOG: Lights when analog signals are assigned. DIGITAL: Lights when digital audio signals are selected. 2 RF: Lights when 2 RF signals are assigned. AUTO: Lights when the receiver is set to select the input signal automatically. 2 Program Format indicators For Dolby Digital or DTS sources : These indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a 6.1 channel playback flag is being used. L - Left front channel. C - Center channel. R - Right front channel. LS - Left surround channel. S - Surround channel (mono). RS - Right surround channel. LFE - Low Frequency Effects channel. ((( ))) - Lights when LFE signal is input. 3 Analog level indicators OVER - This lights if the signal is in danger of distorting for analog source signals. Press INPUT ATT on the front panel to lower the signal level. ATT - Lights when INPUT ATT is used to reduce the level of the analog source signal. 4 Character display Shows current mode, status, etc. 5 Digital format indicators 2 DIGITAL : Lights when a Dolby Digital signal is detected. DTS: Lights when a DTS signal is detected. MPEG: Lights when an MPEG signal is detected. THX: Lights when the HOME THX mode is selected. EX: Lights during Surround EX matrix processing. ES: Lights during DTS ES processing. DISC: Lights during DTS ES discrete processing MTRX: Lights during DTS ES matrix processing 2 PRO LOGIC II: Lights during Dolby Pro Logic II processing. NEO:6: Lights during NEO:6 processing. 2CH PLAYBACK Lights during two-channel playback. 6 Speaker indicators Light to indicate the current speaker system, A and/or B. 7 TAPE 2 indicator Lights when the TAPE 2 monitor is on. 8 TUNER indicators MONO: Lights when the tuner is set to receive FM broadcasts and when selected MPX mode. STEREO: Lights when a FM stereo broadcast is received in the auto stereo mode. TUNED: Lights when a broadcast is received. 34