Pioneer VSX-47TX Owner's Manual - Page 39
CHANNEL LEVEL channel balance
View all Pioneer VSX-47TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Setting Up for Surround Sound CHANNEL LEVEL (channel balance) The following steps show you how to balance the sound output level of your speakers. Proper speaker balance is essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If starting fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p.35) first. If you're not sure of the best setting for your system, we recommend setting the CHANNEL LEVEL to AUTO. VIDEO SEL SIGNAL SEL TAPE 2 EFFECT/CH SELL 5 6 7 8 TONE BASS/TREBLE 9 0 - +10 + DISC ENTER SYSTEM SETUP DIRECT ACCESS DISP MODE REMOTE SETUP MENU TUNER EDIT ENTER STATUS EXIT GUIDE RETURN MPX ¶ TUNING - 1 STATION - 4 CHANNEL - DTV ON/OFF 8 BAND 3 DTV MENU CLASS 7 EXTRA MENU TUNING + ¡ STATION + ¢ CHANNEL+ 1~4 1 2.Surround Setup [ Check ] [ 1.Speaker Systems ] [ 2.Channel Delay ] [ 3.Channel Level ] [ 4.Acoustic Cal EQ ] [Return] 2 3.3. Channel Level [Manual] [Semi Auto] [Auto] Normal Surround [Return] Your Speaker Systems " Normal Surround " 1 CHANNEL LEVEL should be selected. If it isn't use the 5∞ buttons to select and press ENTER. 2 Use the 5∞ buttons to select a channel level setting mode, then press ENTER. Test tones will be output. There are three ways to set the CHANNEL LEVEL: MANUAL; SEMI AUTO; AUTO. MANUAL : For this setting method you move the test tone manually and adjust the channel level. SEMI AUTO : In this setting the test tone moves by itself and you set the levels. AUTO : This way of setting the levels is like that described in the Quick Start Guide (p.13). The levels are set automatically by the receiver as it outputs the test tones. For this setup you must have the mic on the remote control connected (see page 13). WARNING : Be prepared! The test tones are output at a high volume level. MASTER VOLUME rotates to the reference position (0 dB) and the display on the receiver flashes TEST TONE. After a few seconds the test tone is output. memo • If your subwoofer has a volume control, set it to the middle position before doing these operations. SURROUND SET UP 39