RCA 25255RE2 User Guide - Page 28
Do Not Disturb, Flash, Inserting a Pause in the Dialing Sequence - headset
UPC - 845679000018
View all RCA 25255RE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
To switch to the headset, press the headset button to enable the headset, and the headset indicator illuminates. Cordless Handset To switch to the speakerphone, press Spk button. If the headset is plug in, press Talk button to switch to headset. If the headset is not plug in, press Talk button to switch to cordless handset's receiver. Mute To have a private, off-line conversation, use the Mute feature. The party on the other end of the line cannot hear you, but you can still hear them. 1. Press mute button to activate the mute feature. NOTE: When using the mute feature on the base, the indicator will illuminate when the mute is activated. 2. Press the mute button again to de-activate. Do Not Disturb This feature is set at individual telephones to disable (silence) an incoming ring signal, intercom ring. When there is an incoming call or an intercom call, the status indicators function as normal but the phone will not ring. 1. When the unit is idle, press the DND/privacy button. The last setting is displayed. 2. Use the VOL (- or +) button to select the duration. You may choose from 15 minutes, 30 minutes, 45 minutes, 1 hour, or 2 hours and increase the duration by 1-hour intervals up to 24 hours. 3. Press the SELECT Soft key to confirm. The indicator (on the base) blinks and the display shows how long the ringer will be disabled. 4. To cancel, press DND/privacy button again. Flash If you subscribe to Call Waiting Caller ID service from your local telephone company and you receive an incoming call during a call, you will hear a beep to indicate another call is waiting on the line and Caller ID information (if available) for the waiting call shows on the display. • To connect to the waiting call, press the menu/flash button on the handset or the flash button on the base, and your original call is put on hold. • To switch between the two calls, press the menu/flash (Handset) or flash (base) button. Inserting a Pause in the Dialing Sequence Press the #pause button twice to insert a delay in dialing sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence, and is shown as "P" in the display. 28