RCA 25255RE2 User Guide - Page 33

Caller ID (CID) IMPORTANT: In order to use this unit's Caller ID features, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service. When the unit receives an incoming call with CID information, the CID can be shown on the base and handsets. Base Display L1 LINE1 LINE2 Handset Display Receiving and Storing CID Records This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date and time; or the name, phone number, date and time. The unit can store up to 99 records for later review. When the memory is full, a new call automatically replaces the oldest call in memory. NEW appears in the display for calls received that have not been reviewed. The line number for the call received is also displayed. If two incoming calls come in at the same time, both L1 and L2 phone numbers shows on the display while ringing. By pressing the exit key on the base unit or handset during the incoming call ringing mode, the base unit or handset will stop ringing and go back to idle mode. The base unit or handset will not ring in the subsequent ring cycles, but the line icon and handset line Soft key will keep flashing and the base Line LED and handset message LED will flash until the call is answered or the answering system picks up. Reviewing CID Records • Press CID button, and then use the VOL (- or +) button to scroll through the call records. • When you scroll to the start/end of the list, the screen displays --START/END-- . • When reviewing the CID records, the record number is also shown to the right of the time along with the FORMAT and STORE Soft keys. 33