RCA RTB1016WE RTB1016WE Product Manual - Page 9
Connecting the Speakers - remote codes
View all RCA RTB1016WE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connections and Setup Connecting the Speakers Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the terminal and insert the wire. Release the tab to lock wire in the terminal. Subwoofer Center Speaker Purple and Black Green and Black Front Speakers Right Left Red and Black White and Black Insert Press Gray and Black Right Blue and Black Rear Speakers (Surround Sound) Left Release To adjust each speaker volume level for optimum listening experience. 1) Press LEVEL button on the remote control to select the speaker FL (front Left speaker) on the unit display. 2) Press or buttons to adjust the value up or down (between -10dB and +10dB). 3) Repeat step (1) and (2) for the other speakers FR, CT, SW, SL, SR. Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting. Note: When connecting the speakers, make sure the polarities ("+" speaker wire to "+" on the receiver) of speaker wires and terminals match. For example, red wire to red terminal on the receiver. If the cords are reversed, the sound will be distorted. Do not let the speaker wires touch each other, it will damage the system's amplifier. EN - 8