Ricoh Aficio GX3000 User Guide - Page 64

Making Printer Settings Host Interface Menu In the Host Interface menu, you can make network settings and settings for the computer to printer USB connection (if used). Settings made using the Host Interface menu remain effective even if you turn the printer off. I/O Timeout Specify how long the printer waits for the currently-connected interface to respond. When the specified time elapses, the printer can receive data from another interface. If you make the [I/O Timeout] period too short, timeout might occur while data transfer is in progress. If this happens, the print job will be interrupted by a new job from another interface. z 10 seconds z 15 seconds z 20 seconds z 25 seconds z 60 seconds Default: 15 seconds Network Setup You can make network-related settings. DHCP You can specify the DHCP. z On z Off Default: On IP Address You can specify the IP address. When DHCP is set to on, the IP address cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. Default: 0.0.0.0 Subnet Mask You can specify the subnet mask. When DHCP is set to on, the subnet mask cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. Default: 0.0.0.0 Gateway Address You can specify the gateway address. When DHCP is set to on, the gateway address cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. Default: 0.0.0.0 Frame Type (NW) You can select the frame type for NetWare. z Auto Select z Ethernet ll 64