Ricoh Aficio GX3000 User Guide - Page 77

Troubleshooting Troubleshooting Printing Will Not Start ...79 Power Cannot Be Turned On ...79 Paper Will Not Feed Even When the Power Is On ...79 An Error Occurs ...79 Points to Remember when Printer Sharing under Windows 98/Me 80 Paper Is Not Fed or Delivered Normally...81 Paper Jam ...82 Removing Paper Jammed in the Paper Tray (Tray 1)...82 Removing Paper Jammed in the Bypass Tray (optional 83 Removing Paper Jammed under the Top Cover ...86 Removing Paper Jammed around the Guide Board ...87 Removing Paper Jammed in the Duplex Unit ...89 Removing Paper Jammed in the Output Tray ...90 Print Results Are Not Satisfactory...92 Checking the Condition of the Printer ...92 Printing Is Uneven, Too Heavy, or Too Light ...92 Dirty or Blotted Prints ...93 Checking the Printer Driver Setting ...93 Changing the Printer Driver Setting...93 Colours Do Not Match the Displayed Image...95 Positions Do Not Match the Displayed Image...96 Error & Status Messages on the Control Panel ...97 Status Monitor Errors ...100 Status Monitor Does Not Open ...100 No Response from Printer...100 No Paper/Tray Not Detected (Tray 1)...100 Printing by Form Feed ...101 Canceling the Print Job...102 No Paper/Tray Not Detected (Bypass Tray) ...102 Press the [#Enter] key...103 Paper Size Mismatch/Paper Type Mismatch (Tray 1 103 Printing by Form Feed ...103 Canceling the Print Job...104 Paper Size Mismatch/Paper Type Mismatch (Bypass Tray 105 Printing by Form Feed ...105 Canceling the Print Job...106 J0076605_1.00 Copyright © 2005 All rights reserved. 77