Ricoh CL3500N Operating Instructions - Page 147
Gateway Address, Frame Type NW, Active Protocol, Ethernet Speed
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Making Printer Settings Using the Control Panel ❒ When DHCP is set to on, the subnet mask cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. ❒ Default: 000.000.000.000 ❖ Gateway Address You can specify the gateway address. ❒ When DHCP is set to on, the gateway address cannot be changed. To change it, set DHCP to off. Contact your network administrator for information about the network configuration. ❒ Default: 000.000.000.000 ❖ Frame Type (NW) You can select the frame type for NetWare. • Auto Select • Ethernet II • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP ❒ Default: Auto Select ❖ Active Protocol You can select the active protocol. • TCP/IP • NetWare • SMB • AppleTalk ❒ Default: All Active ❖ Ethernet Speed You can select the network speed to operate the printer. • Auto Select • 10Mbps Half D. • 10Mbps Full D. 147