Ricoh CL3500N Operating Instructions - Page 195
route
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Monitoring and Configuring the Printer route Use the "route" command to control the routing table. ❖ All route information display msh> route ❖ Specified route information display msh> route "destination" • Specify the IP address to destination. ❖ Enabling/disabling Specified Destination msh> route active {host|net} "destination" {on | off} • You can turn the specified destination on or off. Host becomes the default setting. ❖ Adding Routing Table msh> route add {host|net} "destination" "gateway" • Adds a host or network route to "destination", and a gateway address to "gateway" in the table. • Specify the IP address to destination and gateway. • Host becomes the default setting. ❖ Setting Default Gateway msh> route add default gateway ❖ Deleting Specified destination from Routing Table msh> route delete {host|net} "destination" • Host becomes the default setting. • IP address of destination can be specified. ❖ Route Flush msh> route flush ❒ The maximum number of routing tables is 16. ❒ Set a gateway address when communicating with devices on an external net- work. ❒ The same gateway address is shared by all interfaces. 195