Ricoh CL3500N Operating Instructions - Page 186
Setting timeout, Setting bidirect, View settings, DNS server configuration, Dynamic DNS function
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Monitoring and Configuring the Printer • The "bidirect" setting indicates whether the direct printing port is bidirectional or not. ❖ Setting timeout msh> diprint timeout [30~65535] • You can specify the timeout interval to use when the printer is expecting data from the network. • The default is 300 seconds. ❖ Setting bidirect msh> diprint bidirect {on | off} • You can specify whether the direct printing port is bidirectional or not. dns Use the "dns" command to configure or display DNS (Domain Name System) settings. ❖ View settings The following command displays current DNS settings: msh> dns ❖ DNS server configuration The following command enables or disables the DNS server address: msh> dns "number" server "server address" The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server: msh> dns 1 server 192.168.15.16 • You can register up to three DNS server numbers. • You cannot use "255.255.255.255" as the DNS server address. ❖ Dynamic DNS function setting msh> dns "interface_name" ddns {on|off} • You can set the dynamic DNS function "active" or "inactive". • {on} means "active" and {off} means "inactive". • ip1394 can be specified only when the IEEE 1394 interface is installed. • wlan can be specified only when the IEEE 802.11b interface is installed. Interface name ether ip1394 wlan Interface configured Ethernet interface IEEE 1394 interface IEEE 802.11b interface 186