Ricoh CL3500N Operating Instructions - Page 228
The smbd service has started.
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Monitoring and Configuring the Printer Message Problem and solutions Printer has no queue (In the print server mode) The print queue is not assigned to the printer. Using NWadmin, assign the print queue to the printer, and then restart it. pserver start. (NetWare) (In the print server mode) The NetWare service has started. Required computer name () The start job found the computer name by add- is duplicated name ing the computer name to the suffix (0,1...). Set a new computer name that is unique. Required file server () not The required file server is not found. found restarted. The lpd service has started. sap enable, saptype=, sapname= The SAP function has started. The SAP packet is issued to advertise the service on the SAP table on the NetWare server. session already defined. The requested community name is not defined. session_ipx not defined. The requested community name is not defined. Set context to An NDS context name has been set. shutdown signal received. network service re- The network service is rebooting. booting... smbd start. (NetBEUI) The smbd service has started. SMTPC: failed to get smtp server ip-address. The SMTP server IP address could not be obtained. This could be because: • The specified DNS server could not be found. • No connection to the network has been established. • The specified DNS server could not be found. • An incorrect DNS server is specified. • The specified SMTP server IP address could not be found in the DNS server. SMTPC: failed to connect smtp server. timeout. Connection to the SMTP server failed due to timeout. This could be because: • The specified SMTP server name is incorrect. • No connection to the network has been established. • The network configuration is incorrect, so there is no response from the SMTP server. 228