Ricoh CL3500N Operating Instructions - Page 240
Print Server Configuration
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Using a Printer Server Use the same printer number created in the print server. I A confirmation message appears. Click [OK]. J On the [NIB] menu, click [Exit]. Setting up using PCONSOLE A Enter "PCONSOLE" from the command prompt. F:> PCONSOLE B Create a print queue. When using the existing print queue, go to the procedure for creating a printer. C From the [Available Options] menu, select [Print Queue Information], and then press the {Enter} key. D Press {Insert} key, and then enter a print queue name. E Press {Esc} key to return to the [Available Options] menu. F Set up the network connection to a printer. G On the [Available Options] menu, click [Print Server Information], and then press the {Enter} key. H To create a new print server, press the {Insert} key, and then enter a print server name. For a currently defined print server, select a print server in the [Print Server] list. Use the same printer name specified using NIB Setup Tool. I From the [Print Server Information] menu, select [Print Server Configuration]. J From the [Print Server Configuration] menu, select [Printer Configuration]. K Select the printer indicated as [Not Installed]. Use the same printer number specified as the remote printer number using NIB Setup Tool. L To change the printer name, enter a new name. A name "Printer x" is assigned to the printer. The "x" stands for the number of the selected printer. M As type, select [Remote Parallel, LPT1]. The IRQ, Buffer size, Starting form, and Queue service mode are automatically configured. N Press the {Esc} key, and then click [Yes] on the confirmation message. 240