Samsung CLP 300N User Manual (ENGLISH) - Page 19
Connecting a Printer Cable, For Local Printing, For Network Printing (CLP-300N only) - windows 8
UPC - 635753722093
View all Samsung CLP 300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting a Printer Cable For Local Printing To print from your computer in a local environment, you need to connect your printer to the computer with a Universal Serial Bus (USB) cable. NOTE: Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 2.0 compliant cable that is not longer than 3 m. 1 Make sure that both the printer and the computer are turned off. 2 Plug the USB cable into the connector on the rear of the printer. For Network Printing (CLP-300N only) You can attach your printer to a network using an Ethernet cable (UTP cable with RJ.45 connector). The CLP-300N has a built-in network interface card. 1 Make sure that both the printer and the computer are turned off. 2 Plug one end of the Ethernet cable into the Ethernet network port on the rear of the printer. 3 Connect the other end of the cable to the USB port on your computer. NOTE: To print using the USB interface, you must run Windows 98/Me/2000/2003/XP or Macintosh with OS 10.3 ~10.4. To the network LAN connection 3 Plug the other end of the cable into a network LAN connection. NOTE: After connecting the printer, you need to configure the network parameters using the software supplied with the printer. Refer to 7.1 2.6 Setting Up Your Printer