Samsung CLP 300N User Manual (ENGLISH) - Page 46
Using Your Printer on a Network, About Sharing the Printer on a Network - mac driver
UPC - 635753722093
View all Samsung CLP 300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
7 Using Your Printer on a Network If you work in a networked environment, the printer can be shared by other users on the network. This chapter includes: • About Sharing the Printer on a Network • Setting Up a Network-Connected Printer(CLP-300N only) • Using SetIP program NOTE: If you are a CLP-300N user, you can only connect your printer to a network locally, for use via a single computer. Setting Up a Network-Connected Printer(CLP-300N only) You have to set up the network protocols on the printer to use it as your network printer. Setting protocols can be accomplished by using the supplied network program. Please refer to SetIP. Supported Operating Systems NOTE: The operating systems supported by the network card may be different than the operating systems supported by the printer. The following table shows the network environments supported by the printer. About Sharing the Printer on a Network If you work in a networked environment, you can connect your printer to the network. Locally-Shared Printer You can connect the printer directly to a selected computer, which is called the "host computer" on the network. The printer can then be shared by other users on the network through a Windows 98/Me/XP/NT 4.0/2000/2003 network printer connection. For details about sharing the printer locally, see the Software Section. Wired Network-connected Printer (CLP-300N only) The CLP-300N printer has a built-in network interface. For more information about connecting your printer to a network, see 2.6. Printing Across a Network Whether the printer is locally connected or network-connected, you need to install the CLP-300 series printer software on each computer that prints documents using the printer. Item Network Interface Network Operating System Network Protocols Dynamic Addressing Server Requirements Ethernet 10/100 Base-TX (standard) • Windows 98/Me/NT 4.0/2000/2003/ XP • Various Linux OS • Macintosh OS 10.3 ~ 10.4 • TCP/IP on Windows • IPP, SNMP DHCP, BOOTP • TCP/IP: Transmission Control Protocol/Internet Protocol • DHCP: Dynamic Host Configuration Protocol • BOOTP: Bootstrap Protocol Using SetIP program This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time. 1 Insert the driver CD provided along with your machine. 2 Start Windows Explorer and open the X drive. (X represents your CD-ROM drive.) 3 Double click Application > SetIP. 4 Open the language folder you want to use. 5 Double click Setup.exe to install this program. 6 From the Windows Start menu, select Programs > Samsung Network Printer Utilities > SetIP. 7.1 Using Your Printer on a Network