Samsung CLP 300N User Manual (ENGLISH) - Page 26
Printing on Card Stock or Custom-sized Materials, with the print side up, and the short edge first
UPC - 635753722093
View all Samsung CLP 300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Printing on Card Stock or Custom-sized Materials • Postcards, 3in by 5in (index) cards, and other custom-sized materials can be printed with your printer. The minimum size is 3in by 5in (76mm by 127mm) and the maximum size is 8.5in by 14in (216mm by 356mm). • Always insert the short edge into the tray first. If you want to print in landscape mode, make this selection using your software. Inserting these materials long edge first may cause a paper jam. • Do not print on material smaller than 3in (76mm) wide or 5in (127mm) long. • In the software application, set margins at least 4mm away from the edges of the material. To print on card stock: 1 Squeeze the paper length guide and slide it out to its full length. 2 Load print material in the tray, with the print side up and the short edge first. Adjust the guides to fit the length and width of the material. NOTE: If you experience jams with card stock feeding, turn the paper around and try again. 3 When you print, set the paper source to Manual Feed and select the appropriate size and type in the software application. For details, see the Software Section. If the size of your print material is not listed in the Size box in the Paper tab, click the Custom button and set the size manually. 4 Press the Stop button on the printer to start feeding. 3.5 Using Print Materials