Samsung CLP 300N User Manual (ENGLISH) - Page 39
Do not touch the fuser inside the inner cover. It is hot - printer problems
UPC - 635753722093
View all Samsung CLP 300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
If you cannot find the jammed paper, go to the next step. 2 To remove the jammed paper, open the rear cover. 4 Close the rear cover and then open the top cover. 3 Carefully remove the paper by pulling in the direction as shown below. Most of the jammed paper can be removed in this step. 5 Holding the inner cover open, carefully take the jammed paper out of the printer. The inner cover will then close automatically. If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to the next step. NOTE: If the paper tears, make sure that all of the paper fragments are removed from the printer. CAUTION: Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser's operating temperature is 180 °C (356 °F). Take care when removing paper from the printer. 6 Close the top cover. Make sure that it is securely closed. 6.4 Solving Problems 7 Open and then close the rear cover or front cover to resume printing.