Samsung NE58K9850WG/AA User Manual - Page 25

Hot surface indicator Comes on when the unit is turned on or hot to the touch. Stays on even after the unit is turned off. Glows until the unit is cooled to approximately 150 °F. How to set the appliance for surface cooking CAUTION The surface elements may be hot even when off and burns can occur. Do not touch the surface elements until they have cooled down sufficiently. At high or medium-high settings, never leave food unattended. Boilovers cause smoking and greasy spillovers may catch on fire. Be sure you turn the control knob to OFF when you finish cooking. Cooking areas • The cooking areas on your range are identified by permanent circles on the glass cooking surface. For the most efficient cooking, fit the pan size to the element size. Pans should not extend more than ½˝ to 1˝ beyond the cooking area. When a control is turned on, you can see a glow through the glass cooking surface. The element will cycle on and off to maintain the preset heat setting, even at high settings. For more information on selecting proper types of cookware, refer to the section "Using the proper cookware" on page 27. • • Single surface unit control knob (left rear, right rear) 1. Push the knob in. 2. Turn in either direction to the setting you want. • At both the off and high settings, the knob clicks into position. Surface cooking • Bridge surface unit control knob (left front) 1. Push the knob in. 2. Turn in either direction to the setting you want. • To use the single surface unit, turn the control knob to the single burner setting. • To use the bridge surface unit, turn the control knob to the bridge burner setting. English 25