Sanyo 26KHHS72R Service Manual - Page 109
Processes and functions
![]() |
View all Sanyo 26KHHS72R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
2. Processes and functions (B) Heating REMOTE CONTROL SENSOR (Only for wireless remote controller) SET. +2 °F SETTING TEMP. SET. -2 °F THERMO. ON THERMO. ON THERMO. OFF THERMO. OFF THERMO. ON BODY SENSOR +2°F SET TEMP.+7 °F SHIFT -2°F THERMO. ON THERMO. OFF THERMO. ON THERMO. OFF THERMO. ON SET TEMP. 5 MINUTES 3 MINUTES MORE THAN 5 MINUTES MORE THAN 3 MINUTES COMPRESSOR OFF ON OFF ON OFF ON 1 OUTDOOR FAN OFF ON OFF ON OFF ON 1 (H OR M) 3 SECONDS 2 INDOOR FAN OFF L LL L SET SPEED LL SET SPEED LL SET SPEED 2 STANDBY OFF ON OFF ON OFF ON OFF 2 (88°F) INDOOR HEAT EXCH. COIL TEMP. 81°F E2 77°F SOLENOID COIL (4-WAY) ON (REVERSING CYCLE) 3 TEMP. OPERATION OFF ON BUTTON 1. Refer to 2-4 Outdoor Fan Speed Control 2. Refer to 2-2 Cold Draft Prevention (Heating) Chart Summary and Explanations 1134_THS_I Fig. 2 4 Once the compressor starts, it keeps running for 5 minutes. Once the compressor stops, it will not start running again for 3 minutes. If you change the operation mode (HEAT, COOL or FAN) during the heating cycle, the control circuit stops the compressor for 3 minutes. For 5 minutes after the compressor is first turned on, and for 3 minutes after it is turned off, the compressor is not controlled by the room sensor. 5 When set on remote control sensor Thermo ON: When room temperature is -2˚F below the set temperature T˚. Compressor ON Thermo OFF: When the room temperature is 2˚F above the set temperature T˚, (T˚+2 ˚F) Compressor OFF When set on body sensor NOTE: In case of Body sensor, operating temperature is shifted to setting temperature +7˚F. 6 SM831148 II-3
![](/manual_guide/products/sanyo-26khhs72r-service-manual-8912f5e/109.png)