Sanyo 26KHHS72R Service Manual - Page 86
Specifications, Increasing the Fan Speed
View all Sanyo 26KHHS72R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
1-9 Increasing the Fan Speed 1. Specifications If external static pressure is too great (due to long extension of ducts, for example), the air flow volume may drop too low at each air outlet. This problem may be solved by increasing the fan speed using the following procedure: (1) Remove 4 screws on the electrical component box and remove the cover plate. (2) Disconnect the fan motor sockets in the box. (3) Take out the jumper cable (sockets at both ends) clamped in the box. (4) Securely connect the jumper cable sockets between the disconnected fan motor sockets in step 2. (5) Place the cable neatly in the box and reinstall the cover plate. Fan motor Electrical component box Jumper cable Jumper cable Fan motor socket (At shipment) (Jumper cable installed) 2159_M_I Indoor Fan Performance 26 Type 36 Type 200 0.8 1 (inAq) Limit line External Static Pressure (Pa) (inAq) 150 150 0.6 Limit line (Pa) Limit line External Static Pressure 0.5 0.5 Limit line 2 100 0.4 100 0.4 0.3 HT 50 0.2 50 0.3 HT 0.2 HH H 0.1 3 L HH H 0.1 L 0 0 300 500 700 900 0 0 500 1000 Air Flow (CFM) Air Flow (CFM) NOTE 1982_U_I HT : Using the booster cable 1983_U_I 4 H : At shipment How to read the diagram The vertical axis is the external static pressure (Pa) while the horizontal axis represents the AIR FLOW (CFM). The characteristic curves for "HT", "H", "M" and "L" fan speed control are shown. The nameplate values are shown based on the "H" air flow. For the 26 type, the air flow is 636 CFM, while the 5 external static pressure is 49 Pa at "H" position. If external static pressure is too great (due to long extension of duct, for example), the air flow volume may drop too low at each air outlet. This problem may be solved by increasing the fan speed as explained above. 6 SM831148 I-82