Sanyo 26KHHS72R Service Manual - Page 178
Fig. 6-7
View all Sanyo 26KHHS72R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Setting the outdoor unit system addresses For basic wiring diagram 2 (Set the system addresses: 1, 2, 3...) Outdoor unit control PCB System address rotary switch (Set to "0" at time of shipment) 3 - 5HP System address rotary switch 0 System address 10s 20s DIP switch ON ON 6. Test run System address rotary switch System address 10s digit and 20s digit DIP switch Automatic address button (black) Terminal plug (black) 1 2 OFF Fig. 6-7 System address No. System address 10s digit (2P DIP switch) System address 1s place (Rotary switch) 0 Automatic address (Setting at shipment = "0") 1 1 (If outdoor unit is No. 1) Both OFF Both OFF ON ON 1 2 OFF ON ON "0" setting "1" setting 1 2 OFF ON ON 2 (If outdoor unit is No. 2) 2 11 (If outdoor unit is No. 11) Both OFF 10s digit ON 1 2 OFF ON ON 1 2 OFF ON ON "2" setting "1" setting 21 (If outdoor unit is No. 21) 20s digit ON "1" setting 1 2 OFF ON ON 30 (If outdoor unit is No. 30) 10s digit and 20s digit ON 3 1 2 OFF "0" setting Automatic address setting using the remote controller When the outdoor unit shown in "Basic wiring diagram 2" is used for group control of multiple outdoor units , use the remote controller to perform automatic address setting. (During automatic address setting, "SETTING" blinks on the remote controller display.) 4 Press the remote controller timer time button and button simultaneously. (Hold for 4 seconds or longer.) Then press the button. (Item code "AA" appears: All systems automatic address setting.) (Automatic address setting is performed in sequence for all outdoor units from No. 1 to No. 30. When automatic address setting is completed, the units return to normal stopped status.) To select each refrigerant system individually and perform automatic address setting, press the remote controller timer time button and button simultaneously. (Hold for 4 seconds or longer.) Then press either the tempera- 5 ture setting or button. (Item code "A1" appears: Individual system automatic address setting) Use either the or button to select the outdoor unit to perform automatic address setting. (For example, when selected R.C.1 "R.C.1" is displayed.) Then press the button. (Automatic address setting is performed for refrigerant circuit 1.) When automatic address setting for circuit 1 is completed, the system returns to normal stopped status. When automatic address setting for circuit 1 is completed, the system returns to normal stopped status. In the same way, press the remote controller timer time button and button simultaneously to per- form automatic address setting for a different R.C. (refrigerant circuit) if necessary. Then in the same way as 6 above (use the dress setting. button to display "R.C.2," for example), select the next circuit and perform automatic ad- VI-8 SM831148