Sanyo PLC-XD2200 RS232C Expand

Sanyo PLC-XD2200 - XGA Able Multimedia Projector Manual

Get Sanyo PLC-XD2200 - XGA Able Multimedia Projector PDF manuals and user guides
UPC - 086483078644
View all Sanyo PLC-XD2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XD2200 manual content summary:

  • Sanyo PLC-XD2200 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-XD2200 PLC-XD2600 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-XD2200 | RS232C Expand - Page 2
    PLC-XD2200/2600 Expand Serial Command Functional Specifications - CONTENTS 1. Overview ...8 2. Serial Interface Specification 8 2.1 Transfer Specification 8 2.2 Connection...8 3. Notes for communication 9 4. Name Definition ...9 5. Functional Execution Command Table 10 5.1 Image Command Table
  • Sanyo PLC-XD2200 | RS232C Expand - Page 3
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command 19 8.4.9 CF_PROGV Command 19 8.4.10 CF_NZRED Command 19 8.4.11 CF_IMAGE Command 20 8.4.12 CF_COLBOARD Command 20 8.4.13 CF_IMAGEADJ Command 20 8.5 PC Adjust Control Command 31 8.8 Lamp Command 32 8.8.1
  • Sanyo PLC-XD2200 | RS232C Expand - Page 4
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10 Setting Command 34 8.10.1 CF_LANG Command 34 8.10.2 CF_MENUPOSITION Command 34 8.10.3 CF_INPUTSEARCH Command 34 8.10.4 CF_AUTOSETUPPCADJ Command 35 8.10.5 CF_AUTOSETUPKEYSTONE Command 35 8.10.6
  • Sanyo PLC-XD2200 | RS232C Expand - Page 5
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.2 Transfer Example 45 9.3 Operation Condition 45 9.4 Image Status Read Command 46 9.4.1 CR_BRIGHT Command 46 9.4.2 CR_CONT Command 46 9.4.3 CR_COLOR Command 46 9.4.4 CR_TINT Command 46 9.4.5 CR_SHARP Command
  • Sanyo PLC-XD2200 | RS232C Expand - Page 6
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.8.1 CR_SCREEN Command 56 9.8.2 CR_ KYSTNMODE Command 56 9.8.3 CR_VSCALE Command 56 9.8.4 CR_VPOS Command 56 9.8.5 CR_HSCALE Command 56 9.8.6 CR_HPOS Command 57 9.9 Lamp Status Read Command 58 9.9.1 CR_LAMPREPL Command 58 9.9.2
  • Sanyo PLC-XD2200 | RS232C Expand - Page 7
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.22 CR_PJLOCKMENU Command 65 9.11.23 CR_FANMODE Command 65 9.11.24 CR_FANCONTROL Command 65 9.11.25 CR_DELAYCTRL Command 66 9.11.26 CR_FILH Command 66 9.
  • Sanyo PLC-XD2200 | RS232C Expand - Page 8
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 1. Overview 1.1 This Functional Specification defines communication functions for PLC-XD2200/2600. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely from PC by RS-232C.
  • Sanyo PLC-XD2200 | RS232C Expand - Page 9
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 3. Notes for communication 1. Expand Serial Command is 4. Name Definition 1. Data from a controller to a projector is represented as COMMAND, and data from a projector to a controller for the incoming command is represented as
  • Sanyo PLC-XD2200 | RS232C Expand - Page 10
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table PC Adjust at Mode 1-10 Release registered values of Mode1-10 5.3 Input Control Command Table Execute command CF_INPUT_%1[CR] CF_SOURCE_%1[CR] CF_INPUT1 _%1[CR] CF_INPUT2_
  • Sanyo PLC-XD2200 | RS232C Expand - Page 11
    P-timer Select Remote Control Reception Code Disable RC/Projector keys Input PIN code to release PJ Lock Select Fan mode Select Fan control mode Set Video delay control Set channel of Closed caption Set color of Closed caption Set time when Filter warning OSD is displayed Reset Filter used time Set
  • Sanyo PLC-XD2200 | RS232C Expand - Page 12
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[CR] CR_SHARP[CR] CR_GAMMA[CR] CR_WBAL-R[
  • Sanyo PLC-XD2200 | RS232C Expand - Page 13
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 6.5 Screen Status Read Command Table Status read command Lamp replacement time Get lamp total running time Get corresponding lamp use time Get Lamp Mode status Get lamp lighting status Get projector total running time Get lamp number
  • Sanyo PLC-XD2200 | RS232C Expand - Page 14
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 6.8 Filter replacement time Get time when Filter warning OSD is displayed 6.9 Other Status Read Command Status read command Item CR_STATUS[CR] CR_SIGNAL[CR] CR_VMUTE[CR] CR_FREEZE[CR] CR_TEMPWARN[CR] Get setting status of Projector
  • Sanyo PLC-XD2200 | RS232C Expand - Page 15
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 7. Error Code Table Error Code ? 101 Contents -When the received data cannot be decoded -Parameter determination error (digit number error, including invalid value, etc.) The
  • Sanyo PLC-XD2200 | RS232C Expand - Page 16
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format 1. PC issues commands in format as below: N/A C00: POWER ON C01: POWER OFF Note:) When the projector receives the other command in this above status, it returns error code to show the
  • Sanyo PLC-XD2200 | RS232C Expand - Page 17
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Command "CF_BRIGHT_ 1 Details Set Tint value of user control Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is
  • Sanyo PLC-XD2200 | RS232C Expand - Page 18
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1"[CR] "000~015 Directly select Sharpness setting value %1 "UP Current Sharpness setting value + 1 "DN Current Sharpness setting value - 1 Details Set Sharpness value of user control
  • Sanyo PLC-XD2200 | RS232C Expand - Page 19
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1"[CR] "000" ------ Xlow %1 can have a blur in moving image Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is
  • Sanyo PLC-XD2200 | RS232C Expand - Page 20
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command "CF_IMAGE_%1"[ user) "CUSTOM2" ----- Image2 (the value set and stored by a user) "CUSTOM3" ----- Image3 (the value set and stored by a user) "CUSTOM4" ----- Image4 (the value set and stored by a user
  • Sanyo PLC-XD2200 | RS232C Expand - Page 21
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 21 / 71
  • Sanyo PLC-XD2200 | RS232C Expand - Page 22
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC Command Command " Details Set Clamp value of PC signal Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is
  • Sanyo PLC-XD2200 | RS232C Expand - Page 23
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H-POS_%1"[CR] "0000 Details Set Display Dots value of PC signal Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF
  • Sanyo PLC-XD2200 | RS232C Expand - Page 24
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command "CF_DLINE_%1"[CR] "0100"~"nnnn Details Set Display Line value of PC signal Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is
  • Sanyo PLC-XD2200 | RS232C Expand - Page 25
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1"[CR] " "INPUT" button of the projector and Remote Control. This command is available in normal Power ON status. Projector returns "101" by selecting Computer
  • Sanyo PLC-XD2200 | RS232C Expand - Page 26
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.6.3 CF_INPUT1 Command Command "CF_INPUT1_%1_"[CR] "ANALOG Select at the same time. This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal
  • Sanyo PLC-XD2200 | RS232C Expand - Page 27
    PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable "Error Code"[CR] 8.6.7 CF_SYSTEM Command Command selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not executed This command is available
  • Sanyo PLC-XD2200 | RS232C Expand - Page 28
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command " image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "
  • Sanyo PLC-XD2200 | RS232C Expand - Page 29
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE_%1"[CR] "UP is not in Custom mode, projector changes image mode into Custom by receiving this command. Note2) When there is no signal detected, projector returns 101 and the command
  • Sanyo PLC-XD2200 | RS232C Expand - Page 30
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7.6 CF_VPOS Command Command "CF_VPOS_%1"[CR] "015 15 "014 14 "002 2 "001 in Custom mode, projector changes image mode into Custom by receiving this command. Note2) When there is no signal detected, projector returns 101 and the
  • Sanyo PLC-XD2200 | RS232C Expand - Page 31
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 14 "002 2 "001 in Custom mode, projector changes image mode into Custom by receiving this command. Note2) When there is no signal detected, projector returns 101 and the
  • Sanyo PLC-XD2200 | RS232C Expand - Page 32
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset total lamp running time This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR]
  • Sanyo PLC-XD2200 | RS232C Expand - Page 33
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command "CF_VOLUME_%1"[CR] "000-031 Directly select Volume setting value %1 "UP Current Volume setting value +1 "DN Current Volume setting value -1 Details Control Volume value The
  • Sanyo PLC-XD2200 | RS232C Expand - Page 34
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command " is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Input search OFF command while Auto PC ADJ. and Keystone are OFF, it returns error code
  • Sanyo PLC-XD2200 | RS232C Expand - Page 35
    PLC-XD2200/2600 Expand Serial Command Functional Specifications ADJ. and Input search to OFF at once. e.g. If projector receives Auto PC ADJ. OFF command while Keystone and Input search after the power is turned to ALL OFF status. *When 1="USER" is received, error code "101" is returned, in the case
  • Sanyo PLC-XD2200 | RS232C Expand - Page 36
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.8 CF_DISP Command Command "CF_DISP_%1"[CR] "ON it does not release LOGO LOCK. (LOGO LOCK continues.) Response Projector returns Error Code "101" by receiving USER in %2 when capture has not operated. Acceptable "000"[CR]
  • Sanyo PLC-XD2200 | RS232C Expand - Page 37
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.10 CF_CEIL Command Command "CF_CEIL_%1"[CR] %1 "ON Set Ceiling to ON "OFF Set Ceiling to OFF Details Set/Cancel Ceiling CR] Unacceptable When Input is Computer 2, the projector returns "101" and the command is not executed
  • Sanyo PLC-XD2200 | RS232C Expand - Page 38
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.14 CF_P-MANE Command Command "CF_P MANE_%1"[CR] "OFF Set Power Management to OFF "READY Set Power Management to Ready "SHUTDOWN Set Power Management
  • Sanyo PLC-XD2200 | RS232C Expand - Page 39
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.17 CF_PTIMEMODE Command Command "CF_PTIMEMODE_%1"[ of Remote Control forward (Code1 → Code2 → Code1 ...) "DN Switch Code setting of Remote Control backward (Code2 → Code1 → Code2...) Details Select Code of Remote Control The
  • Sanyo PLC-XD2200 | RS232C Expand - Page 40
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.21 CF_KEYDIS Command Command "CF_KEYDIS_%1"[CR] "NONE RC & Projector keys are valid (All are valid) %1 "RC RC keys are invalid "KEY Projector keys are invalid Details Disable RC/Projector command every time lamp turns on.
  • Sanyo PLC-XD2200 | RS232C Expand - Page 41
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.24 CF_FANCONTROL Command Command "CF_FANCONTROL_%1"[CR] "OFF Set Fan control to Off %1 "ON1 Set Fan control to On1 "ON2 Set Fan control to On2 Details Set Fan control setting. The status set by this command is stored in
  • Sanyo PLC-XD2200 | RS232C Expand - Page 42
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 300 Set 300 hours %1 "OFF No warning display "UP Switch Filter timer forward (Off →100 → 200 → 300 → Off) "DN Switch Filter timer backward (Off → 300 → 200 → 100→ Off) Details Set timer of Filter replacement /clean-up warning
  • Sanyo PLC-XD2200 | RS232C Expand - Page 43
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command " This command behave the same as corresponding keys of Remote Control / Projector Auto PC adj. keeps operating even though projector receives this command again while Auto PC adj.
  • Sanyo PLC-XD2200 | RS232C Expand - Page 44
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Command Command "CF_FREEZE_%1"[CR] "ON Set Freeze to ON "OFF Set Freeze to OFF %1 "UP Switch setting (On → Off → On → ) "DN Switch setting (
  • Sanyo PLC-XD2200 | RS232C Expand - Page 45
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_Command" [CR] Command : Character Line 2) When projector receives the appropriate command, it returns a character line as the required data "000 "%1 [CR]
  • Sanyo PLC-XD2200 | RS232C Expand - Page 46
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT"[CR] Details Get Brightness value of user control Acceptable "000_ "[CR] Response %a "000"~"063" Unacceptable "Error Code"[CR] 9.4.2 CR_CONT Command
  • Sanyo PLC-XD2200 | RS232C Expand - Page 47
    PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable "Error Code"[CR] 9.4.7 CR_WBAL - R Command Command "CR_WBAL-R"[CR] Details Get White Balance Red value of user control Acceptable "000_%a"[CR] Response %a "000"~"063" Unacceptable "Error Code"[CR] 9.4.8 CR_WBAL -
  • Sanyo PLC-XD2200 | RS232C Expand - Page 48
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.4.12 CR_PROGV Command Command "CR_PROGV"[CR] Details Get setting status of Progressive scan Acceptable "000_%a"[CR] "L1 Progressive Mode L1 is selected Response %a "L2 Progressive
  • Sanyo PLC-XD2200 | RS232C Expand - Page 49
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 49 / 71
  • Sanyo PLC-XD2200 | RS232C Expand - Page 50
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC"[CR] Details Get Fine Sync value Acceptable "000_%a"[CR] Response %a "0000"~"0031" Unacceptable "Error Code"[CR] 9.5.2
  • Sanyo PLC-XD2200 | RS232C Expand - Page 51
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.5.6 CR_DDOTS Command Command "CR_DDOTS"[CR] Details Get Display Dots value Acceptable "000_%a"[CR] Response %a "0256"~"nnnn" (nnnn = Total Dots - Horizontal Position value) Unacceptable "Error Code"[
  • Sanyo PLC-XD2200 | RS232C Expand - Page 52
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS"[CR] Details Get currently selected signal Returns auto-detected signal in Auto mode Only available for Video
  • Sanyo PLC-XD2200 | RS232C Expand - Page 53
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT"[CR] Details Get selected INPUT No. Acceptable "000_%1"[CR] Response Request data "1"-"3" Unacceptable "Error Code"[CR] 9.7.2 CR_SOURCE
  • Sanyo PLC-XD2200 | RS232C Expand - Page 54
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.7.6 CR_SYSTEM Command Command "CR_SYSTEM"[CR] Input is Video,S-Vi deo Unacceptable "MODE10 Mode10 is selected When there is no signal, projector returns error code"101" [CR] "AUTO Auto is selected "1080i 1080i is selected "
  • Sanyo PLC-XD2200 | RS232C Expand - Page 55
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.7.7 CR_SYSLIST Command Command "CR_SYSLIST"[CR] Details Get selectable System titles Acceptable "000_%1_%2_..._%x" [CR] - When Input is PC-Analog "XGA1 XGA1is selectable "1080I 1080i is selectable Projector does not return Auto,
  • Sanyo PLC-XD2200 | RS232C Expand - Page 56
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command Command " PC "CUSTOM Custom mode is selected When the screen is set to D.Zoom, projector returns the previous status (NORMAL ) Input "NORMAL Normal mode is selected is "WIDE
  • Sanyo PLC-XD2200 | RS232C Expand - Page 57
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.8.6 CR_HPOS Command Command "CR_HPOS"[CR] Details Get setting status of Horizontal Position Store Mode Acceptable "000_%1"[CR] Response %1 "-15" ~ "015" Unacceptable "Error Code"[CR] 57 / 71
  • Sanyo PLC-XD2200 | RS232C Expand - Page 58
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1
  • Sanyo PLC-XD2200 | RS232C Expand - Page 59
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command "CR_LAMPSTS"[CR] Details Get Lighting status of lamp Acceptable "000_%1"[CR] "n**** " A number of * should be among 1-4. First character shows how many lamps are incorporated in projector. (1,2 or 4 )
  • Sanyo PLC-XD2200 | RS232C Expand - Page 60
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME"[CR] Details Get Volume value of user control Acceptable "000_%a"[CR] Response %a "000"~"031" Unacceptable "Error Code" [CR] 9.10.2 CR_MUTE Command
  • Sanyo PLC-XD2200 | RS232C Expand - Page 61
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command "CR_LANG"[CR] in Auto setup Acceptable "000_%a"[CR] Response "AUTO Auto Keystone is Auto %a "MANUAL Auto Keystone is Manual "OFF Auto Keystone is OFF 61 / 71
  • Sanyo PLC-XD2200 | RS232C Expand - Page 62
    PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable "Error Code"[CR] 9.11.5 CR_BACKGND Command Command "CR_BACKGND" [CR] Details Get setting status of Screen for no signal Acceptable "000_%1" [CR] Response "BLUE Blue Back is selected %1 "USER User is selected "
  • Sanyo PLC-XD2200 | RS232C Expand - Page 63
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.10 CR_TERMINAL Command Command "CR_TERMINAL" [CR] Details Get setting status of Terminal Acceptable "000_%a"[CR] Response %a "COMPUTER Computer Input mode "MONITOR Monitor Out mode
  • Sanyo PLC-XD2200 | RS232C Expand - Page 64
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.15 CR_PTIMEMODE Command Command "CR_PTIMEMODE"[CR] code"[CR] 9.11.18 CR_RCODE Command Command "CR_RCODE"[CR] Details Get selected Remote Control Code Acceptable "000_%a"[CR] Response %a "001 Code1 is selected "002 Code2
  • Sanyo PLC-XD2200 | RS232C Expand - Page 65
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.20 CR_KEYDIS Command Command "CR_KEYDIS"(CR) Details Get disability status of RC/Projector keys (valid or invalid) Acceptable "000_%a"[CR] "NONE RC / Projector keys are valid Response %a "RC RC keys are invalid "KEY
  • Sanyo PLC-XD2200 | RS232C Expand - Page 66
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.25 CR_DELAYCTRL Command Command "CR_DELAYCTRL"[CR] Details Get setting status of Video delay control Acceptable "000_%1"[CR] Response %1 "ON Video delay control is active "OFF Video delay control is inactive Unacceptable
  • Sanyo PLC-XD2200 | RS232C Expand - Page 67
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.11.30 CR_FILTIMER Command Command "CR_FILTIMER" [CR] Details Get setting time which filter warning OSD is displayed Acceptable "000_%1"[CR] "100 100 hours Response %1 "200 200 hours "300 300 hours "OFF No OSD display
  • Sanyo PLC-XD2200 | RS232C Expand - Page 68
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command "CR_STATUS"(CR) Details Get status of Projector Lamp failure "81"= Stand by after Cooling down due to Lamp -------- No Show is ON, User Logo (My picture) is displayed
  • Sanyo PLC-XD2200 | RS232C Expand - Page 69
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12.5 CR_TEMPWARN Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature If there are several sensors installed, it is
  • Sanyo PLC-XD2200 | RS232C Expand - Page 70
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12.6 CR_TEMP Command Command "CR_TEMP"[CR] Details Get current temperature inside a projector high to display Warning) "S" ------- 0E". Some of the projectors get abnormal temperature because of heat of Lamp ballast in Standby mode
  • Sanyo PLC-XD2200 | RS232C Expand - Page 71
    PLC-XD2200/2600 Expand Serial Command Functional Specifications 9.12.7 CR_TEMPFAIL Command Command "CR_TEMPFAIL"[CR] Details Get the temperature inside a projector when abnormal temperature occurs. If there are several sensors installed, it is possible to get information from all the sensors at
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-XD2200
PLC-XD2600
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division