Sanyo PLC-XD2200 RS232C Expand - Page 12

PLC-XD2200/2600 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[CR] CR_SHARP[CR] CR_GAMMA[CR] CR_WBAL-R[CR] CR_WBAL-G[CR] CR_WBAL-B[CR] CR_COLTEMP[CR] CR_NZRED[CR] CR_PROGV[CR] CR_IMAGE[CR] CR_COLBOARD[CR] CR_IMGGMD[CR] Item Get Brightness value Get Contrast value Get Color value Get Tint value Get Sharpness value Get Gamma value White Balance Red value White Balance Green value White Balance Blue value Get setting value of Color temperature Get setting status of Noise reduction Get setting status of Progressive scan Get Selected Image status Get Selected Colorboard mode Get setting value of Image Gamma 6.2 PC Adjust Status Read Command Table Status read command CR_FSYNC[CR] CR_TDOTS[CR] CR_CLAMP[CR] CR_H-POS[CR] CR_V-POS[CR] CR_DDOTS[CR] CR_DLINE[CR] CR_PCSTORE[CR] Item Get setting value of Fine Sync Get setting value of Total Dots Get setting value of Clamp Get setting value of Horizontal Position Get setting value of Vertical Position Get setting value of Display Dots Get setting value of Display Line Get Free or Stored status for PC Adj. mode1-10 6.3 Video Status Read Command Table Status read command CR_SERSYS[CR] Item Get selected current signal. When in Auto mode, it returns a result by Auto detect. 6.4 Input Status Read Command Table Status read command Item CR_INPUT[CR] CR_SOURCE[CR] CR_SRCINP1[CR] CR_SRCINP2[CR] Get selected Input No. Get selected source of currently selected Input Get selected source of Computer 1 Get selected source of Computer 2 CR_SRCINP3[CR] CR_SYSTEM[CR] CR_SYSLIST[CR] CR_MODELIST[CR] Get selected source of Video Get selected system status in Input mode Get selectable System table Get selectable Mode table 12 / 71