Sanyo PLC-XD2200 RS232C Expand - Page 25

PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1"[CR] "CONPUTER1" ----- Select Computer1 Input "COMPUTER2" ----- Select Computer2 Input "VIDEO Select Video Input "UP Switch Input setting forward When Computer 2 is selected in Terminal menu: Computer1 → Computer2 → Video →Computer1 → ... %1 When Monitor out is selected in Terminal menu: Computer1 → Video →Computer1 → ... "DN Switch Input setting backward When Computer 2 is selected in Terminal menu: Video → Computer2 →Computer1→.... Details When Monitor out is selected in Terminal menu: Video →Computer1→.... Select Input The same operation as "INPUT" button of the projector and Remote Control. This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal menu. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.6.2 CF_SOURCE Command Command "CF_SOURCE_%1"[CR] Input is Computer 1 "ANALOG" ------- Select Analog Input "YPBPR Select Component Input "S VIDEO" ------ Select S-Video Input "SCART Select Scart Input "UP Switch Input as follows Analog →YPBPR →S-Video →Scart →... "DN Switch Input as follows Scart →S-Video →YPBPR →Analog →... %1 Input is Computer 2 "ANALOG" --------- Select Analog Input "UP" "DN" Although no operation is executed, projector accepts parameter "UP" /"DN" Input is Video "VIDEO Select Composite Video Input "UP" "DN" Although no operation is executed, projector parameter "UP" /"DN" accepts Details Select Source of currently selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101" and the command is not executed. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 25 / 71