Sanyo PLC-XD2200 RS232C Expand - Page 35
CF_AUTOSETUPPCADJ Command, 10.5 CF_AUTOSETUPKEYSTONE Command, 10.6 CF_AUTOSETUP Command, 10.7 - user manual
UPC - 086483078644
View all Sanyo PLC-XD2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
PLC-XD2200/2600 Expand Serial Command Functional Specifications Unacceptable "Error Code"[CR] 8.10.4 CF_AUTOSETUPPCADJ Command Command "CF_AUTOSETUPPCADJ_%1"[CR] %1 "ON Set Auto PC ADJ. function to ON "OFF Set Auto PC ADJ. function to OFF Details Response Set/Cancel Auto PC adj. function This command is available in normal Power ON status. Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Auto PC ADJ. OFF command while Keystone and Input search are OFF, it returns error code "101". Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.5 CF_AUTOSETUPKEYSTONE Command Command "CF_AUTOSETUPKEYSTONE_%1"[CR] "AUTO Set Auto Keystone function to Auto %1 "MANUAL Set Auto Keystone function to Manual "OFF Set Auto Keystone function to OFF Details Set Keystone function of Auto setup This command is available in normal Power ON status. Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Keystone OFF command while Auto PC ADJ. and Input search are OFF, it returns error code "101".. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.6 CF_AUTOSETUP Command Command "CF_AUTOSETUP_%1"[CR] %1 "START Execute Auto Setup Details Execute Auto Setup Note) CF commands does not execute while Auto setup is in process. If the command is sent during this, projector returns error code "302" Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.7 CF_BACKGND Command Command "CF_BACKGND_%1" [CR] "BLUE Select Blue Back "USER Select User %1 "BLACK Select Black Back "UP Switch forward (Blue Back→User→Black Back→Blue Back) "DN" --------- Switch backward (Blue Back→Black Back→User→Blue Back) Details Set Screen status for no signal.(Available only in the normal Power ON status) The status set by this command is stored in EEPROM and the setting remains even after the power is turned to ALL OFF status. *When 1="USER" is received, error code "101" is returned, in the case of Capture non-practice. Acceptable "000" [CR] Response Unacceptable "Error Code" [CR] 35 / 71