Sanyo PLC-XD2200 RS232C Expand - Page 8
Overview, Serial Interface Specification, Transfer Specification, Connection, Projector, COM 1,
UPC - 086483078644
View all Sanyo PLC-XD2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PLC-XD2200/2600 Expand Serial Command Functional Specifications 1. Overview 1.1 This Functional Specification defines communication functions for PLC-XD2200/2600. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely from PC by RS-232C. Therefore, the commands are defined as Expand Serial Commands. 2. Serial Interface Specification 2.1 Transfer Specification Item Specification Synchronous System Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bit Parity N/A Stop Bit 1 Flow Control N/A Note1) Transmission Speed: initial setting value is 19200 Note2) Transmission Speed can be changed in service mode. 2.2 Connection Dedicated serial cable must be used for a connection to a computer and a projector. PC COM 1 Projector Control Port (D-Sub 9 Pin) (D-Sub 9 Pin) 8 / 71