Sanyo PLC-XD2200 RS232C Expand - Page 28

PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1"[CR] Input is Computer "NORMAL Select Normal size "TRUE Select True size "WIDE Select Wide size "FULL Select Full screen size "CUSTOM Select Custom size "DZOOM_UP Expand image size with Digital Zoom "DZOOM_DN Reduce image size with Digital Zoom "UP Switch selectable screen size in positive order (Normal → True → Wide → Full → Custom → Normal) "DN Switch selectable screen size in %1 negative order (Normal →Custom → Full → Wide→ True → Normal) Input is Video "NORMAL Select Normal mode "WIDE Select Wide mode "CUSTOM Select Custom size "UP Switch selectable screen size in positive order (Normal →Wide →Custom → Normal) Details "DN Switch selectable screen size in negative order (Normal →Custom → Wide →Normal) Select image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "DZOOM DN" start effecting from the first command. This command is available in normal Power ON status. Response Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered, the signal recognized as Video Input. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.7.2 CF_DZCENT Command Command "CF_DZCENT_%1"[CR] %1 "CENT" ---- Cancel Digital Zoom (CENT: "CENTER") Details Cancel Digital Zoom When image is expanded or shrunk, reset its value. This command is available in normal Power ON status and when Input is Computer. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 28 / 71