Sanyo PLC-XD2200 RS232C Expand - Page 37
CF_CEIL Command, 10.11 CF_REAR Command, 10.12 CF_TERMINAL Command, 10.13 CF_STANDBYMODE
UPC - 086483078644
View all Sanyo PLC-XD2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10.10 CF_CEIL Command Command "CF_CEIL_%1"[CR] %1 "ON Set Ceiling to ON "OFF Set Ceiling to OFF Details Set/Cancel Ceiling setting. The value set by this command is stored in EEPROM and its setting is effective even after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.11 CF_REAR Command Command "CF_REAR_%1"[CR] %1 "ON Set Rear to ON "OFF Set Rear to OFF Details Set/Cancel Rear setting. When Rear is ON, image is left/right reversed. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.12 CF_TERMINAL Command Command "CF_TERMINAL_%1"[CR] %1 "COMPUTER Set Input mode "MONITOR Set Monitor Out mode Details Set Terminal setup. This command is available in normal Power ON status. Terminal means Computer 2 in this model. Acceptable "000"[CR] Response "Error Code"[CR] Unacceptable When Input is Computer 2, the projector returns "101" and the command is not executed. 8.10.13 CF_STANDBYMODE Command Command "CF_STANDBYMODE_%1"[CR] %1 "ECO Less standby electricity "NORMAL Normal standby electricity Details Switch Standby Mode setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 37 / 71