Sanyo PLC-XD2200 RS232C Expand - Page 34

PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1"[CR] "ENG Select English "DEU Select German "FRA Select French "ITA Select Italian "ESP Select Spanish "POR Select Portuguese "NED Select Dutch "SVE Select Swedish "RUS Select Russian "CHI Select Chinese %1 "KOR Select Korean "JPN Select Japanese "FIN Select Finnish "POL Select Polish "HUN Select Hungarian "ROM Select Romanian "THA Select Thai "TUR Select Turkish "KAZ Select Kazakh "VIE Select Vietnamese Details Set language for OSD The language set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.2 CF_MENUPOSITION Command Command "CF_MENUPOSITION_%1"[CR] %1 "SET Move the menu display to next position Details Response Change the menu position This command is available in normal Power ON status. The language set by this command is stored in EEPROM and its setting is effective after ALL is OFF. Position: top left - top right - center - bottom left-bottom right - top left-... Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.3 CF_INPUTSEARCH Command Command "CF_INPUTSEARCH_%1"[CR] "OFF Set Input search operation to OFF %1 "ON1 Set Input search operation to On1 "ON2 Set Input search operation to On2 Details Set Input search operation mode. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Input search OFF command while Auto PC ADJ. and Keystone are OFF, it returns error code "101".. Response Acceptable "000"[CR] 34 / 71