Sanyo PLC-XD2200 RS232C Expand - Page 20
CF_IMAGE Command, CF_COLBOARD Command, 4.13 CF_IMAGEADJ Command
UPC - 086483078644
View all Sanyo PLC-XD2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command "CF_IMAGE_%1"[CR] "DYNAMIC" ------ Dynamic (Fixed value to enable projection with a sharp, powerful picture tone) "STAND Standard (Image adjust value is set to factory default) "REAL Real (Fixed value to display graphic image with natural tone) "CINEMA" -------- Cinema (Fixed value to focus on tone reproduction for movie) "BLACKBOARD" - Blackboard (Fixed value to project image onto green-colored %1 blackboard) blackboard) "COLORBOARD " - Colorboard(Fixed value to project image onto colored board) "CUSTOM1" ----- Image1 (the value set and stored by a user) "CUSTOM2" ----- Image2 (the value set and stored by a user) "CUSTOM3" ----- Image3 (the value set and stored by a user) "CUSTOM4" ----- Image4 (the value set and stored by a user) Details Select Image Mode Parameter "CUSTOM1" to "CUSTOM4" is the same as "Image1" to "Image4" displayed when selecting Image on OSD menu. The value set by this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.4.12 CF_COLBOARD Command Command "CF_COLBOARD_%1"[CR] "RED Select Red %1 "BLUE Select Blue "YELLOW" ------- Select Yellow "GREEN" --------- Select Green Details Select Color of Colorboard mode. Image mode is automatically switched to Colorboard mode by receiving this command. The value set by this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.4.13 CF_IMAGEADJ Command Command "CF_IMAGEADJ_%1"[CR] "RST" ------- Reset Image adjustment "STR1" ----- Store current Image adjustment to Image 1 %1 "STR2" ----- Store current Image adjustment to Image 2 "STR3" ----- Store current Image adjustment to Image 3 "STR4" ----- Store current Image adjustment to Image 4 Details Reset / store Image adjustment. Parameter "STR1" to "STR4" is the same as "Image1" to "Image4" displayed when adjusting Image on OSD menu and selecting "Store" The value stored to "Image1-4" is saved and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 20 / 71