Sanyo PLC-XD2200 RS232C Expand - Page 26

PLC-XD2200/2600 Expand Serial Command Functional Specifications 8.6.3 CF_INPUT1 Command Command "CF_INPUT1_%1_"[CR] "ANALOG Select Analog RGB Input %1 "YPBPR Select Component "S VIDEO" -------- Select S-Video Input "SCART Select SCART Details Select Computer 1 input and source specified by %1 at the same time. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.6.4 CF_INPUT2 Command Command "CF_INPUT2_%1_"[CR] %1 "ANALOG Select Analog RGB Input Details Select Computer 2 input and source specified by %1 at the same time. This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal menu. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.6.5 CF_INPUT3 Command Command "CF_INPUT3_%1_"[CR] %1 "VIDEO Select Composite video Input Details Select Video input. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.6.6 CF_INPUT_%1_%2 Command Command "CF_INPUT_%1_%2"[CR] "COMPUTER1" ------ Select Computer1 Input %1 "COMPUTER2" ------ Select Computer2 Input "VIDEO Select Analog Input "S-VIDEO Select S-video Input When %1 is COMPUTER1 "ANALOG" ----------Select Analog RGB Input "YPBPR Select Component "S-VIDEO Select S-Video Input %2 "SCART Select SCART When %1 is COMPUTER2 "ANALOG Select Analog RGB Input When %1 is VIDEO "VIDEO Select Video Input Details Select Input specified by %1 and also Source specified by %2 at once This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal menu. Response Acceptable "000"[CR] 26 / 71