Sharp DV-HR300U DV-HR300U Operation Manual - Page 112
Messages during Special Playback, Messages during Dubbing
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
On-screen Error Messages Error message RECORDING WAS STOPPED DUE TO FULL DISC. REPAIRING THE DISC. THIS IS A NON-STANDARD DISC. REMOVE IT. THIS VIDEO CANNOT BE RECORDED TO THIS DISC. TIMER RECORDING COULD NOT START. LIVE BROADCAST RECORDING PROHIBITED. RECORDING STOPPED. THIS VIDEO IS COPY PROTECTED. RECORDING IS NOT POSSIBLE. CANNOT OPERATE DUE TO HDD ERROR. CAN VIEW LIVE BROADCASTS ONLY. CONTACT THE NEAREST SHARP AUTHORIZED SERVICER. SYSTEM ERROR. POWER IS OFF. CHECKING HARD DISC. CAN ONLY VIEW LIVE BROADCAST UNTIL CONFIRMATION IS OVER. THIS PROGRAM IS COPY PROTECTED. CANNOT VIEW TIME SHIFT. Possible Error • Occurs when empty space in the disc runs out. • Occurs when recording stops before disc information has been correctly written onto a DVD, due to a problem like a power failure. • Occurs if the loaded disc cannot be recorded to or played because it is a non-standard or scratched, etc. • Occurs if you try to record "Copy Once" video onto DVD-R or nonCPRM compatible DVD-RW. • Occurs if a program begins during recording, and recording of the broadcast itself is forbidden due to copyright protection. • Occurs if you attempt to record a program, and recording of the broadcast itself is forbidden due to copyright protection. • Occurs when there is a problem with the HDD, and when you perform an operation which requires HDD operation, like special playback or recording. • If a problem occurs with the HDD while power is "ON", power is shut off automatically. • Occurs if there is a power failure, or the power cord is unplugged and plugged in again while power is "ON". • Occurs if time shift viewing is impossible because recording of the broadcast itself is forbidden by copyright protection. Suggested Solution • Wait until DVD disc recovery is finished. • Remove the disc. • Record on CPRM compatible DVDRW disc in VR mode. • Initialize the HDD once. If initialization does not solve the problem, please contact the nearest Sharp Authorized Service Center as soon as possible. • It may take 1-2 minutes to check the HDD. During this time, you can only watch live broadcasts. Wait a while until the check is over. • You can only view live broadcasts. Messages during Special Playback Error message CANNOT OPERATE DUE TO THE CONDITION OF HARD DISC. Possible Error • Occurs if you perform operation like special playback when there is problem with the HDD. HARD DISC IS NOT READY YET. CANNOT OPERATE. • Occurs if you perform operation requiring operation of the HDD (like special playback or recording) during HDD preparation. Suggested Solution • The HDD must be repaired, so contact the nearest Sharp Authorized Service Center as soon as possible. • You can only view live broadcasts until preparation is finished. Wait a while until operation is enabled. (If you use the Recorder at a cold location and the HDD temperature is low, HDD preparation may take some time.) Messages during Dubbing Error message CANNOT SELECT MORE. Possible Error • Occurs if you attempt to select 6 titles (chapters) at the screen for selecting titles or chapters to be dubbed. Suggested Solution • Dub 5 titles (or chapters) at a time. 112