Sharp DV-HR300U DV-HR300U Operation Manual - Page 32
Channel Setting
![]() |
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Channel Setting Channel Setting This Recorder can receive a maximum of 181 channels as shown below by presetting the channels into memory. (VHF: 2 to 13, UHF: 14 to 69, CATV: 1 to 125) 1 Press START MENU to display the START MENU screen. 2 Press to select "OTHER SETTINGS", then press SET/ENTER. 3 Press \ / | to select "ADJUST- MENT". OTHER SETTINGS[ADJUSTMENT] REC. FUNCTION VIEW/PLAY SETTING 12 / 25 SAT 10 : 28 AM ADJUSTMENT CLOCK SETTING VIDEO/AUDIO SETTING CHANNEL PRESET OPTION SETTING 4 Press ' / " to select "CHANNEL PRESET", then press SET/ ENTER. 5 Press \ / | to select "AIR" or "CATV", then press SET/ENTER. Example: AIR • To watch CATV after EZ Set Up, select "CATV", then press SET/ ENTER. 6 Press \ / | to select "AUTO", then press SET/ENTER. OTHER SETTINGS[CHANNEL PRESET] 12 / 25 SAT 10 : 28 AM SELECT RECEPTION TYPE AIR CATV SELECT CHANNEL PRESET METHOD AUTO MANUAL 7 Auto Channel Preset will start. • The channel display will count up, and, when finished, the screen returns to normal. NOTE • If the power is interrupted for more than 1 hour, AIR/CATV selection must be set again. • Auto Channel Preset will be interrupted if START MENU is pressed before the screen returns to normal. Adding/Erasing Channel Memory Use this function to manually add or erase channels to/from the memory. 1 Select the channel to be added with the Number buttons, or the channel to be erased with the CH ' / " or Number buttons. 2 Press START MENU to display the START MENU screen. 3 Press to select "OTHER SETTINGS", then press SET/ENTER. 4 Press \ / | to select "ADJUST- MENT". 5 Press ' / " to select "CHANNEL PRESET", then press SET/ ENTER. 6 Press to select "MANUAL", then press SET/ ENTER. OTHER SETTINGS[CHANNEL PRESET] 12 / 25 SAT 10 : 28 AM SELECT RECEPTION TYPE AIR CATV SELECT CHANNEL PRESET METHOD AUTO MANUAL 7 Press \ / | to select "ADD" if you want to add the channel memory, or "ERASE" if you want to erase the channel memory. [ADD] OTHER SETTINGS[MANUAL CHANNEL SETUP] 12 / 25 SAT 10 : 28 AM 3 ADD \/| [ERASE] OTHER SETTINGS [MANUAL CHANNEL SETUP] 12 / 25 SAT 10 : 28 AM 3 ERASE 8 Press EXIT to return to normal screen. 32
![](/manual_guide/products/sharp-dvhr300u-dvhr300u-operation-manual-cac2cfb/32.png)