Sharp DV-HR300U DV-HR300U Operation Manual - Page 22
Basic Connection
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Basic Connection Easy Connection The following connection is the basic connection to watch or record TV programs. To use a cable box or satellite receiver, see "CATV or Satellite Receiver Connections" on pages 24 and 25. Important! •Be sure to turn off and unplug from the AC outlet this Recorder and all equipment before connecting the cables. •This Recorder is equipped with copy protection technology. The playback picture from this Recorder will not appear correctly on your TV when you connect this Recorder to your TV via a VCR (or your VCR via this Recorder) using video/audio cables. TV To video/audio input jacks To video/audio input jacks Video/audio cable (supplied) 4 To antenna input jack VCR Video/audio cable (commercially available) Coaxial cable 5 (commercially available) 3 To antenna output jack To video/audio output jacks To antenna input jack 2 Coaxial cable (supplied) To PASS THROUGH The Recorder 1 Connect the TV antenna cable to the IN FROM ANTENNA jack on the rear of this Recorder. 2 Connect the PASS THROUGH jack on the rear of this Recorder to the antenna input jack on your VCR using the supplied coaxial cable. NOTE •If you connect this Recorder directly to your TV, skip the next step. 3 Connect the antenna output jack on your VCR to antenna input jack on your TV using a coaxial cable. 4 Connect the VIDEO/AUDIO Output jacks on this Recorder to the video/audio input jacks on your TV using the supplied video/audio cable. Be sure that the colors of the jacks and plugs match up when connecting the cable. NOTE •To connect using S-video or component cables, see "Using Other Types of Video Output" on page 23. 5 Connect the video/audio output jacks on your VCR to the video/audio input jacks on your TV using a video/audio cable. Important! •When using this connection, set "PROGRESSIVE OUT" to "PROGRESSIVE SCAN OFF" (see page 102). After the connection Plug in the power cords of the TV and VCR. Then go to "EZ Set Up" (see page 26). To antenna/CATV To IN FROM wall outlet ANTENNA 1 Antenna cable (commercially available) To VIDEO/AUDIO Output jacks 22