Sharp DV-HR300U DV-HR300U Operation Manual - Page 40

Recording to DVD This section explains recording on the DVD (For information on recording to HDD, see page 38.) Checking Remaining Time and Other Information Press ON SCREEN (under the cover) during DVD playback or recording. • Disc capacity and the number of recorded titles, etc. are displayed. It is recommended to confirm before recording. DVD-RW VR ORIG IN AL F I NE REMAIN 0h30m 2 10 00 : 00 : 00 Disc capacity Number of titles Number of chapters • "REMAIN 0hr 0min" or nothing will be displayed when an unrecordable disc is set. NOTE • Disc remaining time display is approximate measure of disc capacity. There may be space left in disc capacity after recording. (Remaining time during recording and after recording might not be the same.) Tamper Proof • You can set Tamper Proof to prevent operations by mistake during recording or timer recording. 1 Press and hold TAMPER PROOF (ON SCREEN and DISPLAY together) for more than 2 seconds. 2 Each time you perform this operation, the function is activated or deactivated. • If you try to operate the Recorder while Tamper Proof is set, " " blinks in the front display panel and tells you that Tamper Proof is set. Loading Disc 1 Press POWER to turn the power on. 2 Press OPEN/CLOSE on the Recorder to open the disc tray. OPEN/CLOSE 3 Load disc on the disc tray. Simultaneous Recording/ Playback (page 77) • HDD playback is possible while recording or timer recording to DVD. Dubbing (page 57) • Dubbing titles recorded on DVD to HDD or titles recorded on HDD to DVD-R/RW are possible. • Exact Dubbing: Automatically selects the appropriate recording mode according to the remaining capacity of DVD when dubbing titles recorded on HDD to DVD. Not Enough Disc Capacity • Exact Recording (page 98) Exact recording functions when the selected recording mode is not appropriate to fit the program to the disc when you timer record. (Will not function during timer dubbing.) • Alternate Recording (page 104) Alternate recording functions when you forget to load a DVD for timer recording. It automatically timer records the program to HDD. Cutting TV Commercials (page 81) • You can cut unwanted scenes like TV commercials by using the ERASE SCENE function after the recording. (Cannot cut TV commercials automatically.) • You cannot cut scenes when you record programs by Video mode to DVD-RW or DVD-R. • Insert the disc with the label face up. • In case of disc recorded on both sides, face the side you want to record down. 4 Press OPEN/CLOSE to close the disc tray. Direct Recording to DVD DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE Explained below is the standard procedure for recording the program being viewed onto DVD. • You can create a maximum of 99 original titles. • Record in VR mode when you want to edit later. Edit functions will be limited when you record in Video mode. Preparation for Direct Recording • When you record SAP broadcast, set "SAP SETTING" to "ON" (see page 98). 1 Press DVD to select DVD mode. • The DVD button on the front of the Recorder lights up. • When the power is turned on, HDD mode is selected automatically. 40