Sharp DV-HR300U DV-HR300U Operation Manual - Page 55

Automatic Recording of Satellite Broadcast (AV AUTO REC) HDD When connected to a satellite receiver, etc. with a timer recording function, this Recorder can be used to automatically record the timer program. (Refer to the operation manual of the satellite receiver, etc. for instructions on how to set the timer program.) Example: Use of AV AUTO REC Function Satellite receiver, etc. Set timer program 2:00 AM 3:00 AM Timer Program 4:00 AM 5:00 AM Timer Program This Recorder Set AV AUTO REC function 2:00 AM 3:00 AM 4:00 AM 5:00 AM Records timer program Records timer program Recording Recording Recording Recording begins ends begins ends Power ON Power OFF Power ON Power OFF Important! • The AV AUTO REC function only operates when used with a satellite receiver, etc. with timer recording functions. • The AV AUTO REC function will only operate when the satellite receiver, etc. is connected to the LINE IN 1 (AUTO REC) jacks on the rear of the Recorder. • AV AUTO REC function is a function to record to HDD. You cannot use this function to record to DVD. • Recording mode is set to FINE when recorded using AV AUTO REC. You cannot choose any other recording mode. Connecting to a Satellite Receiver, etc. To use the AV AUTO REC function, connect the satellite receiver, etc. to the LINE IN 1 (AV AUTO REC) jacks on the rear of the Recorder. The Recorder To LINE IN 1 (AV AUTO REC) jacks Video/audio cable (supplied) To video/audio output jacks Satellite receiver, etc. Recording with AV AUTO REC 1 Set up the satellite receiver, etc. • Set the recording timer on the satellite receiver, etc. for the program you wish to record. (Refer to the operation manual of the satellite receiver, etc. for instructions on how to set the program timer.) 2 Turn off the satellite receiver, etc. 3 1 Press HDD to select HDD mode. • HDD button on the front of the Recorder lights up. 2 Press INPUT to select "L1" (LINE IN 1 [AV AUTO REC]). 4 Select external audio. • Set "EXTERNAL AUDIO" of "REC. FUNCTION" to "STEREO" or "DUAL MONO" (page 98). • Set "DUAL MONO REC. SET" of "REC. FUNCTION" to either "L CH" or "R CH" when you set "HI SP DUB PRIORITY" to "YES" (page 98). 5 Press POWER to turn off the Recorder. 6 Press and hold AV AUTO REC (under the cover) for more than two seconds. • External automatic recording function switches on or off every time you operate this function. • "AUTO REC" is displayed on the front display panel (page 18). • Recording automatically starts and stops when the Recorder receives a signal from satellite receiver, etc. at start time and stop time. NOTE • When recording PPV (pay-per-view) programs of satellite broadcasts, always make sure to set the satellite receiver, etc. to "Record". Certain programs may not be recorded or require additional charges for recording. • Use AV AUTO REC in combination with a satellite receiver, etc. equipped with a timer recording function. • Since the power of this Recorder is switched on after the video signal from a satellite receiver, etc. has been received, the start of a program may not be recorded. • When using AV AUTO REC function, it is recommended that you set the timer recording start time a little earlier than usual. 55