Sharp DV-HR300U DV-HR300U Operation Manual - Page 38
Recording to HDD
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Recording to HDD This section explains recording on the hard disc (HDD). (For information on recording to DVD, see page 40.) Confirming Remaining Time for Recording To confirm on TV screen • Press ON SCREEN (under the cover). To confirm on front display panel • Press DISPLAY (under the cover). Confirming Remaining Time This display means that you can record 20 hours more in FINE mode. HDD ORIG IN AL F I NE REMAIN 20h0m 10 10 00 : 00 : 00 • During live program viewing or HDD playback, remaining time of recording in the selected recording mode will be displayed. • During HDD recording, remaining time of recording in the currently selected recording mode will be displayed. Guide to Recordable Length of Time Recording Mode Recording mode FINE SP LP EP Recording time 20 hr 33 hr 67 hr 100 hr • Remaining time for recording differs according to the recording mode. • Recordable time might be less than above figures depending on the program to be recorded. • MN (manual) recording mode setting allows you to select the picture quality from among 32 levels on the "MANUAL REC. MODE" screen (page 42). Monitoring a Program Being Recorded while Playing Back a Disc (page 77) • Picture in picture This lets you monitor a program being recorded, while playing back a disc, using the Simultaneous Recording/Playback function. (This will not work during progressive scanning playback.) Dubbing (page 57) • Titles recorded on HDD can be saved by dubbing them to DVD-R/RW. (You can also dub from DVD-R/RW to HDD.) • You can batch dub up to 5 programs. • You can timer program dubbing so that the recording takes place at a time when you don't use the Recorder. Recording Programs to HDD for High Speed Dubbing from HDD to DVD-R/RW in Video Mode (page 52) • High Speed Dubbing Priority Normally, recording onto HDD is done using own format, but recording can also be done using a format for high speed dubbing onto DVDs formatted in Video mode. To perform high speed dubbing onto a DVD in Video mode, set "HI SP DUB PRIORITY" to "YES" and then record. (See page 52.) Favorite Program Timer Recording (page 49) • You can set "Overwrite Program Timer" to periodically and automatically record a news report, etc., or "Serial Program Timer" to automatically record an entire series (e.g. drama series) you wish to save. Chasing Playback (page 37) • This lets you playback and watch a program from the beginning while it is being recorded on HDD. Simultaneous Recording/ Playback (page 77) • This lets you playback and watch a program recorded on HDD, or a DVD or CD, while recording another program on HDD. Cutting out Commercials (pages 81, 92) • After recording is finished, you can cut out commercials and other unnecessary scenes by calling up the Erase Scene function. (Commercials cannot be cut out automatically during recording.) Tamper Proof • You can set Tamper Proof to prevent operations by mistake during recording or timer recording. 1 Press and hold TAMPER PROOF (ON SCREEN and DISPLAY together) for more than 2 seconds. 2 Each time you perform this operation, the function is activated or deactivated. • If you try to operate the Recorder while Tamper Proof is set, " " blinks in the front display panel and tells you that Tamper Proof is set. Information • When there is a report message (e.g. when a timer recording was not successfully performed), the Recorder displays an onscreen message telling that there is a report message. Check the report message by selecting "INFORMATION" on the START MENU. 38